[. . . ] [. . . ] Caution when removing the bracket from CD-1A> After removing the bracket indicated by the arrow in the above drawing by loosening 2 x screws, DO NOT put them back to the CD-1A holes where they were originally mounted. Otherwise, the tip of the screw touches the tray internally to disable tray eject. <Correction on VF80 owner's manual> There is a false description in the installing procedure (4) on the page 135 of VF80 owner's manual. Refer to the following correction. <CORRECT installing procedure No. 4> Using the screw (1 pc. ) which was used to tighten the blank panel to VF80, fix CD-1A to the VF80 chassis. When tightening the screw, do not apply an excessive force. © PRINTED IN JAPAN FEB. [. . . ] [. . . ]